LENEL 2220 Intelligent Dual Reader Controller x2220 firmware 1.275 6 Available

Description

These are stock Items and was sent to lenel for the latest firmware upgrade to 1.275. the same as the x2220. All boards were checked and are working properly. 30 day warranty. This is the best price online
LNL-2220 Overview The LNL-2220 Intelligent Dual Reader Controller (IDRC) by Lenel provides a single board solution for interfacing one or two doors to an OnGuard® system. In addition, other I/O and reader interface modules can be added on the LNL-2220’s downstream port to expand its capabilities. The LNL-2220 revolutionizes access control system architecture by allowing Ethernet connection directly from an entry location to the OnGuard server, while still providing the security, functionality, and modularity of Lenel’s proven hardware platform. The LNL-2220 is scalable for any access control application, from the most basic to the most sophisticated. In the event of communication loss, the LNL-2220 allows nearly all local functionality to continue unimpaired until the server connection is restored. Utilizing its native Ethernet communications and an advanced 32- bit processor, the LNL-2220 can communicate upstream to the host computer through its Ethernet port (with a throughput up to eight times greater than the fastest serial connections), or at up to 115.2 Kbps using RS-232 communication directly or through an external dial-up modem. The LNL-2220 can store up to 250,000 cardholders in non-volatile flash memory, and supports selective download for larger cardholder databases. The downstream RS-485 two-wire port can be used to connect up to 32 devices (maximum 64 doors). Two on-board reader ports support Data1/Data0, Clock/Data, Bioscrypt RS-485 readers and the bidirectional RS-485 Open Supervised Device Protocol (OSDP) communications. Each LNL-2220 supports up to eight different card formats. The LNL-2220 includes eight inputs that support normally open, normally closed, supervised, and unsupervised circuits. In addition, four output relays support fail-safe or fail-secure operation. FEATURES & FUNCTIONALITY Controller Functionality • On-board Ethernet 10/100Base-T port provides up to 8 times greater throughput than serial-to-Ethernet converters. DHCP and fixed IP addressing supported. • DNS device naming through DHCP extended commands • 6 MB of available on-board, non-volatile flash memory • Battery-backed, non-volatile storage of 50,000 events • Firmware stored in flash memory, background download of firmware updates supported • Supports up to 16 different formats (8 card formats and 8 asset formats) • Biometric template storage support for Schlage Recognition Systems®, Bioscrypt®, and Identix®. • Direct connection of Bioscrypt RS-485 devices • Enhanced anti-passback capabilities • Up to 32,000 access level permissions • 255 holidays with grouping, 255 timezones, each with 6 intervals • Elevator control support for up to 128 floors • Individual extended held open and strike times (ADA required) • Up to 9-digit user PIN codes • 20 status LEDs • 2 dedicated inputs for tamper and power failure status • 12 or 24 VDC input power • Advanced Encryption Standard (AES) 128-bit algorithm for communications Reader Interface Functionality • Supports Data1/Data0, Clock/Data and Lenel OSDP-compatible RS-485 readers and keypads • 4 Form-C relay outputs, 5 A at 30 VDC • Door contact supervision (open/closed) and REX push-button monitor for each door • Strike control and auxiliary output for each door • Bicolor reader status LED support plus beeper control, or 2-wire LED support • On-board regulator allows 12 VDC reader power from 24 VDC